Installation and Replacement of High Quality Roll Up Banner

Installation and Replacement of High Quality Roll Up Banner

Deluxe Roller Banner is used in high end places such as 5 star hotel, luxury events and brand launch party. The banner can be used for several times by simply change the banner.

1. Installation of High Quality Roll Up Banner : 
2. Prepare to assemble the banner by laying out all the hardware. 
3. Lift open the clip on the top bar. Insert the printed fabric into the clip & press it closed. Set aside. 
4. Slide out the stick bar. 
5. Place the backside of the bottom of the fabric onto the sticky area of the stick bar. Slide the stick bar back to the tension cartridge. 
6. Unfold those poles inserting them together, so they form one long pole。 
7. Insert the plastic cap on the pole in the clip on the top bar. 
8. Installation is complete. You are ready to use your Deluxe Roller Banner at your event.

Replacement of the High Quality Roll Up Banner :

1. Pull banner out to its full length, gently, so you can see the instructions on the tab at the bottom of the banner. 
2. Insert the key that came with the banner into hole on side of base to lock the roll-up mechanism and keep the banner from rolling back into canister 
3. At top of banner remove the silver Snap Clip Bar. Use a flat screw driver to insert into slot along top edge and twist screw driver to spread bar open. Repeat this step along the bar until open. 
4. Place the Snap Clip Bar on the top of the new banner. Be sure the bar is centered on banner and the sticker on the bar is facing the back side of banner. 
5. Press firmly on the bar to close and lock the banner in place. 
6. Remove old banner 
7. The new banner will have a strip of adhesive tape with a red plastic covering. Peel off the red plastic cover to expose the adhesive strip and place new banner on tab. Make sure the banner is lined up straight. Press firmly to adhere to tab. 
8. Before removing the key from the side of the canister, be sure that you have a hand firmly on the new banner to ensure that it slowly rolls back into the base. 

Watch the Following instruction Video: