Questions about photo printing and Inkjet printing

The setting of the Advertisement Size :

Due to the raw material size width is 0.914, 1.07, 1.27, 1.52 m , we recommend the size of the printing should be small than 2m. If the design is larger than 2m,we recommend to 1/2 or 1/4 of the design.

 Photo printing or Inkjet Printer:

Generally, indoor and short distance (2 meters) product, photo printing is a good choice. For outdoor and waterproof ,inject printing is recommended. The inject printing is cheaper than photo printing overall.

Usage:

Photo printing product can be used indoor for 2 years without changing the color and as in outdoor sunlight conditions about 3 -6 months.Inkjet Printing products can maintain for 5 years in the indoor , as in outdoor sunlight condition about 10 month -2 years, no atomization.

Waterproof and sunscreen applications must be used outdoors or outdoor photo.

PVC Foam Advertising Board

PVC Foam Advertising Board






PVC foam board also known as PVC expansion sheet and Andy plate . PVC foam board is widely used in advertising banner or poster.

The thickness of 0.3 -2 cm in general.Common color is white and black.

The advertising PVC foam board is widely used in screen printing, UV printer printing, computer lettering and engraving, advertising labeling, display boards.

Customized PVC Foam Advertising Board per to your request. Contact our Customer service for your orders.

Introduction of PVC foam Board

PVC Foam Sheet

PVC foam board is made of PVC, for it's a good capability of waterproof, fire resistance and bear acid and alkali, PVC foam board is widely used in advertising silk-screen and architecture decorative. It can be made in various colors(3mm), and PVC foam board has a special advantage in inviolate and uniformity thickness, it's an ideal choice for indoor and outdoor advertising.

Material: PVC

Thickness:1--25mm

Size: 1220x2440mm

Color: white

Maximo Width:1.22m

Length: As your required

Density: 0.4--0.8g/cm3

Advantages:

1)Resistant to chemicals and corrosion
2)Homogeneous, glossy and smooth surface
3) Good deep-drawing qualities
4)Good for foiling
5)Easy workability
6)Low flammability
7) Impact-resistant or increased impact resistance
8)Weather resistantIt

Application:

1. Advertising Industry: carving, signs, billboard, poster, logo, exhibition display, Silk screen printing, UV flat bed printing, digital direct printing, and coating 

2. Building and decoration: Office and house clapboard, ceiling; also for bus, train, ship inner decoration; kitchen and bath cabinet etc furniture.

3.Industrial usage: photo album, chemical anti-corrosion project, cold storage, special cold isolating project, environmental protection, sports equipment, cultivation, coastal moisture-proof equipment, water-resistant materials, art material.

Installation and Replacement of High Quality Roll Up Banner

Installation and Replacement of High Quality Roll Up Banner

Deluxe Roller Banner is used in high end places such as 5 star hotel, luxury events and brand launch party. The banner can be used for several times by simply change the banner.

1. Installation of High Quality Roll Up Banner : 
2. Prepare to assemble the banner by laying out all the hardware. 
3. Lift open the clip on the top bar. Insert the printed fabric into the clip & press it closed. Set aside. 
4. Slide out the stick bar. 
5. Place the backside of the bottom of the fabric onto the sticky area of the stick bar. Slide the stick bar back to the tension cartridge. 
6. Unfold those poles inserting them together, so they form one long pole。 
7. Insert the plastic cap on the pole in the clip on the top bar. 
8. Installation is complete. You are ready to use your Deluxe Roller Banner at your event.

Replacement of the High Quality Roll Up Banner :

1. Pull banner out to its full length, gently, so you can see the instructions on the tab at the bottom of the banner. 
2. Insert the key that came with the banner into hole on side of base to lock the roll-up mechanism and keep the banner from rolling back into canister 
3. At top of banner remove the silver Snap Clip Bar. Use a flat screw driver to insert into slot along top edge and twist screw driver to spread bar open. Repeat this step along the bar until open. 
4. Place the Snap Clip Bar on the top of the new banner. Be sure the bar is centered on banner and the sticker on the bar is facing the back side of banner. 
5. Press firmly on the bar to close and lock the banner in place. 
6. Remove old banner 
7. The new banner will have a strip of adhesive tape with a red plastic covering. Peel off the red plastic cover to expose the adhesive strip and place new banner on tab. Make sure the banner is lined up straight. Press firmly to adhere to tab. 
8. Before removing the key from the side of the canister, be sure that you have a hand firmly on the new banner to ensure that it slowly rolls back into the base. 

Watch the Following instruction Video: